QL-550
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/lpql550euk.jpg)
QL-550
Date: 17/10/2019 ID: faqp00000515_000
I cannot communicate with the product during installation. (Communication error message is displayed.)
Check the following to identify the cause of the problem.
-
Check the product and computer's network segment
The product and the client computer running the configuration utility must be in the same segment.
If there is no router involved, be sure to assign an IP address for the product and the computer within the same segment. -
Check if the computer running the configuration utility has an IP address assigned
Check the computer's network settings using the Network properties box or the "ipconfig" command.
If the computer does not have an IP address, configure an IP address. -
Check if there is any router or DHCP server that can assign IP addresses automatically
The automatic process may have assigned an IP address to the product where network communication cannot be established with the computer.
Configure IP addresses in the same local environment where the router or server does not exist when installing the product for the first time. -
The product being installed has previous setting information
Initialise the product to factory defaults and then conduct the configuration.
Refer to "How do I reset the PS-9000 to factory default settings?".
PS-9000, PS-9000, PT-9200DX, PT-9500PC, QL-1050, QL-1050N, QL-500, QL-500A, QL-550, QL-560, QL-650TD
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.