Innov-is A16
FAQs & Troubleshooting |
Innov-is A16
Date: 23/04/2020 ID: faqh00101510_002
Outline of viewing the LCD Screen
LCD Operation
When the machine is turned on, the LCD will light up and the following screen is displayed.
To change the displayed settings, use the operation keys and stitch pattern selection dial.
No. | Display | Item Name | Explanation | ||||||
(1) | Needle position setting |
Shows whether the needle is in the programmed raised or lowered position.
|
|||||||
(2) | Stitch length |
Shows the stitch length of the currently selected stitch pattern. When is displayed around , the stitch length is set to the default value. |
|||||||
(3) | Stitch width |
Shows the stitch width of the currently selected stitch pattern. When is displayed around , the stitch width is set to the default value. |
|||||||
(4) | Automatic reverse/ reinforcement stitching |
Shows that the automatic reverse/reinforcement stitching is currently turned on. | |||||||
Stitch pattern display window
The stitch number and presser foot are shown in the stitch pattern display window.
(1) Stitch number (2) Presser foot |
- The symbols for certain presser feet, such as zipper foot "I" and the quilting foot, may not appear in the Stitch pattern display window.
Innov-is A16
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.