Innov-is XJ2
 |
FAQs & Troubleshooting |
Innov-is XJ2
Date: 30/11/2020 ID: faqh00101454_000
The App shows the message "The sheet could not be detected. Make sure that the sheet and mobile device are level."
This message is displayed when the Lens Calibration Sheet can not be detected correctly during Lens Calibration.
Check the following points or solutions
1. Shooting the Lens Calibration Sheet
In the first photo, take a picture of the sheet from directly above as shown in the figure.
Be sure that the square marks are aligned within the blue round brackets.
In the second photo, take a picture of the sheet from an angle as shown in the figure.
Be sure that the square marks are aligned within the blue round brackets.
2. Shooting location
Perform Lens Calibration in a lighted environment.
Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XJ2
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.