SDX2250D
 |
FAQs & Troubleshooting |
SDX2250D
Date: 14/12/2018 ID: faqh00101322_000
Why is the fabric not cut cleanly?
Use one of the specialized sheets for fabric cutting (Iron-on fabric appliqué contact sheet or High tack adhesive fabric support sheet) when cutting fabric.
Iron-On Fabric Applique Contact Sheet : Apply directly to fabric or other suitable material
Hight Tack Fabric Support Sheet : Apply to standard mat for best results.
When cutting fabric for quilt pieces, install the thin fabric auto blade (beige), and use the high tack adhesive fabric support sheet.
Fabric may not be cut cleanly when Half Cut is set to ON. Make sure that OFF is selected.
For details on half cuts, refer to Half Cut (Kiss Cut) Settings.
-
For details on the appropriate sheet for cutting fabric, refer to Mat, Cutting Blade and Material Combinations.
-
Included accessories may vary depending on the machine model. Required accessories not included with the machine may be purchased separately.
To purchase accessories or for details on using them, contact the retailer where the machine was purchased or the nearest authorized service center.
Related FAQs
SDX1200, SDX135, SDX2200D, SDX2240D, SDX2250D, SDX900, SDXTL
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.