FS-40
 |
FAQs & Troubleshooting |
FS-40
Date: 06/02/2014 ID: faqh00000477_004
How do I draw up the lower thread?
-
Raise the presser foot using the presser foot lever.
Presser foot lever -
Lightly hold the end of the upper thread.
Upper thread -
While holding the end of the upper thread, raise the needle either by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing
(needle position button) (for models equipped with the needle position button) once or twice.
Mark on the handwheel 
Needle position button -
Pull on the upper thread to draw up the lower thread.
Upper thread 
Lower thread -
Pull out about 10 cm (4 inches) of both threads and pull them toward the back of the machine under the presser foot.
Upper thread 
Lower thread
Related FAQs
AS-40, FS-20, FS-40, FS-40WT
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.