Innov-is 5000
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inov5000euk.jpg)
Innov-is 5000
Date: 14/09/2007 ID: faqh00000377_000
How do I recall a specific embroidery pattern from the computer?
- Plug the USB cable connector into the corresponding USB port connectors for the computer and for the machine.
- The USB cable can be plugged into the USB port connectors on the computer and machine whether or not they are turned on.
USB port connector for computer
USB cable connector
The "Removable Disk" icon will appear in "My Computer". - The connectors on the USB cable can only be inserted into a connector in one direction.
If it is difficult to insert the connector, do not insert it with force and check the orientation of the connector.
- For details on the position of the USB port on the computer, refer to the instruction manual for the corresponding equipment.
- Open "My Computer" then go to "Removable Disk".
- Move/copy the pattern data to "Removable Disk".
Pattern data in "Removable Disk" is written to the machine. - While data is being written, do not disconnect the USB cable.
- Do not create folders within "Removable Disk".
Since folders are not displayed, pattern data within folders cannot be recalled. - Press
.
The patterns in the computer are displayed on the selection screen. - Press the key of the pattern you want to recall.
- Press the "SEWING" key. (Depending on the model, press
.)
The sewing screen is displayed.
The pattern recalled from the computer is only temporarily written to the machine.
It is erased from the machine when the machine is turned off.
If you wish to keep the pattern, store it in the machine.
Related FAQs
Innov-is 1200, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 700EII, Innov-is I, Innov-is Ie
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.