XL-6040
 |
FAQs & Troubleshooting |
XL-6040
Date: 30/01/2008 ID: faqh00000091_001
How do I remove the presser foot holder?
- Raise the needle by turning the handwheel toward you (anti-clockwise) so that the mark on the wheel points up.
With models equipped with
(needle position button), raise the needle by pressing it.
or
Mark
Needle position button - Turn off the sewing machine.
- Raise the presser foot lever. The presser foot is raised.
Presser foot lever - Press the black button at the back of the presser foot holder.
The presser foot holder releases the presser foot.
Black button
Presser foot holder - Use the screwdriver to loosen the presser foot holder screw.
The presser foot is removed from the presser bar.
Screwdriver
Presser foot holder
Presser foot holder screw
Presser bar
Before replacing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if a button is accidentally pressed and the machine starts sewing.
BM-3500/2600, BM-3600/2700, CS-8060, CS-8120, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 150SE/ 150, Innov-is 200, Innov-is 350SE, Innov-is 400, Innov-is 500D, Innov-is 550SE/ 550, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, JS23, LS-2125, NX-200, NX-400Q/400, NX-600, PE-300S, PE-400D, PS-53/55/57, PX-100/200/300, PX-330, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5011/5012/5021/5031/5032, XL-5050/5060/5070, XL-5500, XL-5600, XL-5700, XL-6040, XL-6600, XR-65T
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.