A bobbin case with a green marking has been installed in this machine, with an alternate bobbin case (with pink marking or no marking) provided as an accessory.

When using the embroidery bobbin thread provided, please be sure to choose the green marked bobbin case when performing utility stitch sewing and embroidery functions.

When in the embroidery function mode, the alternate bobbin case (with pink marking or no marking) should be selected when substitute embroidery bobbin threads (other than what is accompanied with your machine) are being used.

The alternate bobbin case (with pink marking or no marking) can be easily adjusted when bobbin tension changes are required to accommodate different bobbin threads.

pink marking or no marking

• This page describes how to adjust a bobbin tension for embroidery using the alternate bobbin case (with pink marking or no marking).
• Download an embroidery pattern for adjustment, embroider the pattern and check a result, then adjust the alternate bobbin case if necessary.

1. Prepare following items.
   
   

   (1).Screwdriver(Small)	(2).Bobbin wound with bobbin thread	(3).Embroidery pattern (will be downloaded in Procedure 4 below.)	(4).Fabric and embroidery frame

2. Install a bobbin wound with bobbin thread into an alternate bobbin case set in the sewing machine.
3. Make sure the upper thread tension is set to 4.0.
4. Download an embroidery pattern and transfer it to the sewing machine.
   Click the "Download" link to download the embroidery pattern.
   The following 3 methods are available to transfer the downloaded embroidery pattern to the sewing machine.
   
   
   • USB media
     1. Save the downloaded embroidery pattern onto the USB media.
     2. Recall the downloaded embroidery pattern from the USB media.
     
     
   • PC
     
     1. Recall the downloaded embroidery pattern from the PC.
     
     
   • Embroidery card
     
     1. Save the downloaded embroidery pattern into an Embroidery card.
     2. Select the downloaded embroidery pattern from the embroidery card.
   
   
   
5. Sew the downloaded embroidery pattern on the fabric and check the result, referring to stitch samples below.
   If you do not get a correct result, remove the alternate bobbin case from the sewing machine and adjust it.
   
   

surface of fabric

underside of fabric

Be sure to check if the bobbin is installed correctly before you embroider the pattern. If you can only see the bobbin thread on both sides of fabric as shown in the left picture, the bobbin is not installed correctly. For details, refer to "Correctly installing a bobbin

When you adjust an alternate bobbin case, turn the slotted-head(-) screw using screwdriver  (small).


DO NOT adjust the position of the Phillips (+) screw  Adjust with a screwdriver(small).





• When adjusting the alternate bobbin case, be sure to remove the bobbin from the alternate bobbin case.
• DO NOT adjust the position of the Phillips (+) screw on the alternate bobbin case as this may result in damage to the bobbin case, rendering it unusable.
• If the slotted-head screw (-) is difficult to turn, do not use force it.
  Turning the screw too much or providing force in either (rotational) direction may cause damage to the bobbin case.
  Should damage occur, the bobbin case may not maintain the correct  tension.

<Correct tension> * Upper thread slightly appears on the underside of the fabric.
surface of fabric	underside of fabric

<Bobbin thread is loose> * Bobbin thread appears slightly on the surface of the fabric.
surface of fabric	underside of fabric

<Bobbin thread is tight> * Upper thread on the surface of fabric seems to be lifting/looping and bobbin thread is not seen on the underside of the fabric.
surface of fabric	underside of fabric