PE-400D
 |
FAQs & Troubleshooting |
PE-400D
Date: 08/01/2007 ID: faqh00000027_000
My thread keeps jamming.
Check if the upper thread is tangled. Remove the thread completely from the machine. Re-thread the machine according to the instructions in the manual.
Check the correct size spool cap is being used for the size of the thread spool.
Remove the bobbin and make sure the bobbin is threaded properly in the shuttle race. Remove any loose threads or lint in the shuttle race.
Check the tension is not too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually.
Check the combination of the needle size, thread size and fabric is correct. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.
- (Example: Denim-size 16 needle and 40-50 heavy-duty thread ).
Related FAQs
AS-40, BC-2100/2300, BC-2500, BM-3500/2600, BM-3600/2700, DS-120, DS-140, ES-2000, FS100WT, FS130QC, FS180QC, FS-20, FS210, FS250FE, FS-40, FS-40WT, FS60, FS60s, FS70WT, FS70WTs, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, JK4000, JK7000, JS23, LS-2125, NX-200, NX-2000, NX-400Q/400, NX-600, PE-300S, PE-400D, PS-53/55/57, PX-100/200/300, PX-330, QC-1000, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5011/5012/5021/5031/5032, XL-5050/5060/5070, XL-5500, XL-5600, XL-5700, XL-6040, XL-6600, XR-65T, XR-6600
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.