FAQs & Troubleshooting

Close

Innov-is 55FE

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is 55FE

Not your product?

Date: 08/01/2007 ID: faqh00000027_000

My thread keeps jamming.

 


  1. Check if the upper thread is tangled. Remove the thread completely from the machine. Re-thread the machine according to the instructions in the manual.

  2. Check the correct size spool cap is being used for the size of the thread spool.  

  3. Remove the bobbin and make sure the bobbin is threaded properly in the shuttle race. Remove any loose threads or lint in the shuttle race.

  4. Check the tension is not too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually.

  5. Check the combination of the needle size, thread size and fabric is correct. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.

     

    • (Example: Denim-size 16 needle and 40-50 heavy-duty thread ).

Related FAQs

Related Models

AS-40, BC-2100/2300, BC-2500, BM-3500/2600, BM-3600/2700, DS-120, DS-140, ES-2000, FS100WT, FS130QC, FS140, FS180QC, FS-20, FS200CE, FS210, FS250FE, FS250ME, FS-40, FS-40WT, FS60, FS60s, FS70WT, FS70WTs, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, JK4000, JK7000, JS23, LS-2125, NX-200, NX-2000, NX-400Q/400, NX-600, PE-300S, PE-400D, PS-53/55/57, PX-100/200/300, PX-330, QC-1000, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5011/5012/5021/5031/5032, XL-5050/5060/5070, XL-5500, XL-5600, XL-5700, XL-6040, XL-6600, XR-65T, XR-6600

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.