Innov-is 700E
FAQs & Troubleshooting |
Innov-is 700E
Date: 11/05/2006 ID: faqh00000021_000
My outline is sewing off the pattern
This happens when the fabric is not set in the embroidery frame correctly or the upper thread is too tight.
incorrect backing material (stabilizer) is put on the fabric. A thick stabilizer has to be used for elastic or thin fabric.
Check the fabric is set tight in the frame
Decrease the upper thread tension manually to the basic thread tension setting or less.
Related FAQs
Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, PE-180D, PE-190D, PE-300S, PE-400D, SuperGalaxie 3000/3000C/3000D/3100D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.