Innov-is 350SE
FAQs & Troubleshooting |
Innov-is 350SE
Date: 23/10/2015 ID: faqh00000014_000
Why does the lower thread keep breaking?
The lower thread could be breaking due to several reasons.
- Check to see if the lower thread be tangled.
One Point Advice When thread got tangled
-
The bobbin could be threaded improperly in the shuttle hook.
Rethread the bobbin in the shuttle hook.
Please refer to "Installing a bobbin" of "Preparation" category.
Related FAQs
AE1700, AE2500, AE2700, AS-40, BC-2100/2300, BC-2500, BM-3500/2600, BM-3600/2700, CS-8060, CS-8120, DS-120, DS-140, ES-2000, FS100WT, FS130QC, FS140, FS180QC, FS-20, FS200CE, FS210, FS250FE, FS250ME, FS-40, FS-40WT, FS60, FS60s, FS70WT, FS70WTs, HC14, HF27, HF37, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 500D, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, JK1700, JK2500NT, JK2700NT, JK4000, JK7000, JS23, KE14s, L14, L14s, L17, LK14, LK14s, LS14, LS14s, LS17, LS-2125, LX17, LX25, LX27NT, LX37NT, NX-200, NX-2000, NX-400Q/400, NX-600, PE-180D, PE-190D, PE-300S, PE-400D, PQ-1500/1500S, PQ1600S, PS-53/55/57, PX-100/200/300, PX-330, QC-1000, RH127, RH137, RL417, RL425, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, UJ417, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5011/5012/5021/5031/5032, XL-5050/5060/5070, XL-5500, XL-5600, XL-5700, XL-6040, XL-6600, XN1700, XN2500, XQ2700, XQ3700, XR27NT, XR37NT, XR-65T, XR-6600
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.