FAQs & Troubleshooting

Close

Innov-is XP3

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is XP3

Not your product?

Date: 12/10/2007 ID: faqh00000009_000

Embroidery

  • Problems that occur most in embroidery is misalignment of the pattern.
  • This is caused mostly because a fabric is loose when it’s set in the embroidery frame.
  • Make sure to set the fabric tightly into the embroidery frame so that you hear a drum-like sound if you tap the fabric lightly.

  • Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
  • Prepare a stabilizer material that is larger than the embroidery frame being used.
  • Make sure to attach the correct surface of the stabilizer material to the fabric securely using an iron.
Fabric 1 Fusible side of stabilizer

2 Fabric(wrong side)
  • Use Brother embroidery threads and needle 75/11 for embroidery.

 

Related Models

Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is F440E, Innov-is F480, Innov-is F540E, Innov-is F580, Innov-is I, Innov-is Ie, Innov-is M230E, Innov-is M240ED, Innov-is M280D, Innov-is M330E, Innov-is M340ED, Innov-is M380D, Innov-is NV2600, Innov-is NV2650D, Innov-is NV2700, Innov-is NV2750D, Innov-is NV800E, Innov-is NV870SE, Innov-is NV880E, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XJ2, Innov-is XP1, Innov-is XP3, Innov-is XV, PE-180D, PE-190D, PE-300S, PE-400D, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, PP1, SuperGalaxie 3000/3000C/3000D/3100D

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.