CS-8120
 |
FAQs & Troubleshooting |
CS-8120
Date: 09/05/2006 ID: faqh00000003_000
When thread gets tangled.
- When a machine stops working due to tangled thread, do not turn the handwheel by force as the lower thread may not be picked up correctly and stitches may not be formed properly.
- Remove the needle plate and cut the tangled threads with scissors.
AE1700, AE2500, AE2700, AS-40, BC-2100/2300, BC-2500, BM-3500/2600, BM-3600/2700, CS-8060, CS-8120, DS-120, DS-140, ES-2000, FS100WT, FS130QC, FS140, FS180QC, FS-20, FS200CE, FS210, FS250FE, FS250ME, FS-40, FS-40WT, FS60, FS60s, FS70WT, FS70WTs, HF27, HF37, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 500D, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, JK1700, JK2500NT, JK2700NT, JK4000, JK7000, JS23, L14, L17, LK14, LS14, LS17, LS-2125, LX17, LX25, LX27NT, LX37NT, NX-200, NX-2000, NX-400Q/400, NX-600, PE-180D, PE-190D, PE-300S, PE-400D, PQ-1500/1500S, PQ1600S, PS-53/55/57, PX-100/200/300, PX-330, QC-1000, RH127, RH137, RL417, RL425, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, UJ417, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5011/5012/5021/5031/5032, XL-5050/5060/5070, XL-5500, XL-5600, XL-5700, XL-6040, XL-6600, XN1700, XN2500, XQ2700, XQ3700, XR27NT, XR37NT, XR-65T, XR-6600
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.