MFC-L6970DW
FAQs & Troubleshooting |
MFC-L6970DW
Date: 20/02/2019 ID: faq00100662_000
Print by Raspbian (Linux)
Printing
To print using a terminal
Open a terminal window.
Use the following command:
lpr -P BrGenPrintML2 print_file_name
To change the print settings, use the "-o" switch:
lpr -P BrGenPrintML2 -o PageSize=A5 -o Resolution=300dpi print_file_name
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W : brprintconf_mfcj430w
To print from an application
Open the file you want to print.
In the application you are using, go to the print dialogue box.
In the print dialogue box, select "BrGenPrintML2" as the printer name.
If the print jobs are not printed successfully, make sure you have correctly configured the printer's IP address or node name using the lpadmin command.
Supported File Formats
We recommend using the lpr command only when printing the following formats: PDF, PS, TXT, and JPG. To print other file formats, print directly from the application supporting that file format.
DCP-L2500D, DCP-L2520DW, DCP-L2540DN, DCP-L5500DN, DCP-L6600DW, HL-L2300D, HL-L2340DW, HL-L2360DN, HL-L2365DW, HL-L5000D, HL-L5050DN, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW , HL-S7000DN, MFC-L2700DN, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.