FAQs & Troubleshooting

Close

DCP-J1100DW

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-J1100DW

Not your product?

Date: 22/03/2019 ID: faq00100364_506

Correct the Paper Feed to Clear Vertical Lines

Adjust the paper feed to reduce vertical lines.

Before adjusting the paper feed, make a print quality check first by pressing [Settings]>[Maintenance]>[Improve Print Quality]>[Check Print Quality].

  1. Press [Settings]>[Maintenance]>[Improve Print Quality]>[Correct Paper Feed].
  2. Press [Next].
  3. Press [Yes] after a confirmation message if a print quality check has been completed appears on the LCD.
  4. Press [Auto] or [Manual].
    • If you select the [Auto] mode, the paper feed is automatically adjusted by scanning the adjustment sheet.
    • If you select the [Manual] mode, you need to input information printed on the adjustment sheet manually.
  5. If you selected the [Auto] mode, select the paper size to print the alignment check sheet on.
  6. Load specified size paper in the tray, and then press [Start].
    The machine prints the adjustment sheet.
  7. Follow the instructions on the LCD.

Related Models

DCP-J1100DW, MFC-J1300DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit