DCP-L3527CDW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/dcpl3527cdw_eu.jpg)
DCP-L3527CDW
Date: 11/01/2023 ID: faq00100214_010
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
- DO NOT reset the drum counter unless you are replacing the drum unit.
- If you reset the drum counter without replacing the drum unit, the machine will not be able to correctly calculate the remaining drum life.
- Make sure the machine is turned on.
- Make sure the machine's cover is closed.
- Hold down OK as you press the Up arrow key.
- Press OK to select Drum.
- Press the Up or Down arrow key to display the toner colour for the drum unit you just replaced, and then press OK.
- Press the Up arrow key to reset the drum counter.
Related FAQs
DCP-L3510CDW, DCP-L3515CDW, DCP-L3520CDW(E), DCP-L3527CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.