MFC-L3730CDN
FAQs & Troubleshooting |
MFC-L3730CDN
Date: 11/01/2023 ID: faq00100214_009
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
- DO NOT reset the drum counter unless you are replacing the drum unit.
- If you reset the drum counter without replacing the drum unit, the machine will not be able to correctly calculate the remaining drum life.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Make sure the machine is turned on.
- Make sure the machine's cover is closed.
- Press and hold (Toner) for about five seconds.
- Press Drum.
- Select the toner colour for the drum unit you just replaced.
- Press Yes.
Related FAQs
DCP-L3550CDW, HL-L3270CDW, MFC-L3710CW, MFC-L3730CDN, MFC-L3750CDW, MFC-L3770CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.