MFC-J4710DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcj4710dw_us_eu_as.jpg)
MFC-J4710DW
Date: 10/06/2015 ID: faq00100128_000
I still receive the error message "Cover is Open" after I closed the scanner cover. (With Video Instructions)
If you still receive the error message Cover is Open, the scanner cover support and scanner cover damper may not be mounted correctly.
The scanner cover support is the bar to support the scanner cover when you lift the scanner cover into the open position.
The scanner cover damper is located inside the left side of the scanner cover as shown in the image below.
Follow the steps listed below to resolve this issue.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
Place the machine on a bright flat surface for mounting the scanner cover support.
If you place the machine on a slope, you may catch your hand under the scanner cover.
-
Remove the scanner cover support and scanner cover damper from your Brother machine.
If the scanner cover support and scanner cover damper have already come off, continue to STEP 2.
How to use the buttons: Start the video Skip the video Stop the video Restart the video
Operating Time: 5-10 minutes
-
Mount the scanner cover support and scanner cover damper to your Brother machine.
How to use the buttons: Start the video Skip the video Stop the video Restart the video
Operating Time: 5-10 minutes
DCP-J4110DW, DCP-J4120DW, MFC-J4410DW, MFC-J4420DW, MFC-J4510DW, MFC-J4610DW, MFC-J4620DW, MFC-J4625DW, MFC-J4710DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.