MFC-J5910DW
FAQs & Troubleshooting |
MFC-J5910DW
Date: 13/10/2015 ID: faq00002769_001
Scan a fax into my Brother machine while it is sending a fax from memory, receiving a fax, or printing a document from my computer.
Your Brother machine has Dual Access capabilities.
You can dial a fax number and start scanning a fax into the Brother machine's memory, even when the machine is sending a fax from memory, receiving faxes, or printing documents from a computer. The Brother machine's LCD will display the new job number.
-
You cannot use Dual Access to store colour faxes in memory.
-
The number of pages you can scan into the memory will vary depending on the data that is printed on them.
- If the Out of Memory message appears while your Brother machine is scanning a document, press Stop/Exit to cancel the transmission or press Black (Mono) Start to immediately send the scanned pages.
To use Dual Access, follow these steps:
-
Load your document.
-
Enter the fax number you want to send to.
-
Press Black (Mono) Start on the Brother machine.
-
As the machine scans the document, the LCD displays the fax job number.
- After the machine scans the document, it will start dialling the number you entered. You can immediately repeat STEPS 1 through 3 to scan the next document you want to fax.
-
As the machine scans the document, the LCD displays the fax job number.
Related FAQs
MFC-J430W, MFC-J470DW, MFC-J5910DW, MFC-J625DW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.