MFC-J6947DW
FAQs & Troubleshooting |
MFC-J6947DW
Date: 02/10/2018 ID: faq00002541_525
Clean the Paper Pick-up Rollers
Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds correctly.
- Unplug the machine from the electrical socket.
- If the paper support flap is open, close it, and then close the paper support.
- Pull the paper tray (1) completely out of the machine as shown by the arrow.
- Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
- Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
- Put the paper support firmly back in the machine. Make sure you fit the paper support into the channels.
- Slowly push the paper tray completely into the machine.
- Reconnect the power cord.
MFC-J6945DW, MFC-J6947DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.