FAQs & Troubleshooting

Close

DCP-J785DW

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-J785DW

Not your product?

Date: 13/10/2015 ID: faq00002537_007

Ink is still wet after printing on Glossy Paper and even after ink dries, smudges appear.

To resolve this issue ensure that the Media Type setting in the printer driver or the Paper Type setting in the machine's menu matches the type of paper you are using.

 

Even if you use non-Brother Glossy Paper and choose Other Photo Paper or Other Glossy for the settings, still this issue may occur. In that case choose Brother BP71 Photo Paper for your settings.

 

 

 

Proper paper handling after page has been printed:

 

  • After the photo has finished printing, remove the photo immediately from the machine and place on a flat surface to dry for 24 hours. Do not allow additional printed documents lay on top of the photo while in the machines paper output tray.

  • Do not place anything on top of the photo until after 24 hours. This can cause the picture not to dry properly.

  • Do not place the photo in a photo album or picture frame until after 24 hours. This can cause the picture not to dry properly.

 

Click the link below for your case and follow the steps to confirm or change the setting:

 

 

 

 

Printing from the computer

 

 

(Windows)

 

  1. Open Printing Preferences. (Click here to see how to open Printing Preferences.)

     
  2. Open the Basic tab.

     
  3. Choose Photo Paper (Brother BP71 Photo Paper / Other Photo Paper) for the Media Type.
     
    image

  4. Click OK.

 

(Mac OS X)

 

  1. Open the Print dialog. (Click here to see how to open the Print dialog.)

     
  2. Choose Print Settings in the Print dialog box.
     
    image

  3. Click on the drop down menu next to Media Type.

     
  4. Choose Photo Paper (Brother BP71 Photo Paper / Other Photo Paper).
     
    image

 

Printing from a memory card or USB Flash memory drive (PhotoCapture Center™)

 

 

You can change the print settings for the next print job. This setting is temporary, and the machine returns to its default settings 1 minute after printing.

 

 
  1. Open the media slot cover.

     
  2. Put the memory card or USB Flash drive in the correct slot.

     
  3. Press Photo.

     
  4. Press the Left or Right arrow to display View Photos.

     
  5. Press View Photos.

     
  6. Press the Left or Right arrow to display each photo. When the photo you want is displayed, press it, and then press OK.

     
  7. Press OK.

     
  8. Press Print Settings.

     
  9. Press the Up or Down arrow to display Paper Type.

     
  10. Press Paper Type.

     
  11. Press the Up or Down arrow to display Photo Paper (Brother BP71 / Other Glossy). Press the option you want to set.

     
  12. Press Back (Back) or OK.

     
  13. Press Start to print.

Related Models

DCP-J4120DW, DCP-J552DW, DCP-J562DW, DCP-J752DW, DCP-J785DW, MFC-J4420DW, MFC-J5320DW, MFC-J650DW, MFC-J6520DW, MFC-J6720DW, MFC-J680DW, MFC-J870DW, MFC-J880DW, MFC-J985DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.