MFC-J4535DWXL
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcj4535dw_us_eu.jpg)
MFC-J4535DWXL
Date: 14/07/2021 ID: faq00002490_043
No Paper / No Paper Fed [Tray 1] / No Paper Fed [Tray 2]
There are several reasons that the Brother machine displays No Paper, No Paper Fed [Tray 1], No Paper Tray [Tray 2]. Check the following points to clear the No Paper, No Paper Fed [Tray 1], No Paper Fed [Tray 2] message.
Cause 1: The machine is out of paper or paper is not correctly loaded in the paper tray.
Cause 2: The paper was not inserted in the centre position of the manual feed slot.
Cause 3: The Jam Clear Cover is not closed correctly.
Cause 4: Paper dust has accumulated on the surface of the paper pick-up rollers.
Cause 1: The machine is out of paper or paper is not correctly loaded in the paper tray.
Do one of the following:
- Refill the paper tray, and then follow the machine's display (hereinafter called LCD) instructions.
- Remove and reload the paper, and then follow the LCD instructions.
To load paper in the paper tray, see the Related FAQs at the end of the page.
Cause 2: The paper was not inserted in the centre position of the manual feed slot.
Remove the paper and reinsert it in the centre of the manual feed slot and then follow the LCD instructions.
> Click here to see how to load paper in the manual feed slot.
Cause 3: The Jam Clear Cover is not closed correctly.
Make sure the Jam Clear Cover is closed evenly at both ends.
Cause 4: Paper dust has accumulated on the surface of the paper pick-up rollers.
Clean the paper pick-up rollers.
> Click here to see how to clean the paper pick-up rollers.
Related FAQs
MFC-J4535DWXL, MFC-J4540DW(XL)
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.