FAX-2840
FAQs & Troubleshooting |
FAX-2840
Date: 08/05/2013 ID: faq00002411_016
Cover is Open
Check the solution applicable for your case.
Case 1: The front cover is not completely closed.
Close the front cover of the machine.
Case 2: The Control panel cover is not completely closed.
Make sure that the Control panel cover of your machine is completely closed.
Case 3: The Control panel cover was open when you loaded a document.
Close the Control panel cover of the machine, then press Stop/Exit.
Case 4: The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power.
- Close the fuser cover of the machine.
- Make sure paper is not jammed inside the back of the machine, and then close the fuser cover and press Start.
FAX-2840, FAX-2940
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.