DCP-8250DN
FAQs & Troubleshooting |
DCP-8250DN
Date: 02/09/2014 ID: faq00002411_015
Cover is Open
Check the following to clear the message:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
The front cover is not completely closed. Close the front cover of the machine.
-
The ADF cover is not completely closed. Close the ADF cover of the machine.
-
The ADF is open while loading a document. Close the ADF cover of the machine, then press Stop/Exit.
-
The fuser cover (1) is not completely closed or paper was jammed in the back of the machine when you turned on the power. Make sure paper is not jammed inside the back of the machine, and then close the fuser cover (1) and press Start.
DCP-8110DN, DCP-8250DN, MFC-8510DN, MFC-8520DN, MFC-8950DW, MFC-8950DWT
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.