MFC-L3750CDW
FAQs & Troubleshooting |
MFC-L3750CDW
Date: 02/07/2019 ID: faq00002306_011
The colour of your printouts is not what you expected
Check the following points to resolve the issue:
-
To improve the colour density, calibrate the colours using first the Touchscreen / Control Panel and then the printer driver.
> Click here to see how to carry out calibration. -
To adjust the print position of colours for sharper edges, perform the colour registration using the Touchscreen / Control Panel.
> Click here to see how to perform the colour registration. - Adjust the copy density and contrast if you are copying.
- Make sure Toner Save mode is off on the Touchscreen / Control Panel or the printer driver.
- If the print quality is poor, clear the Improve Grey Colour check box in the printer driver.
- If the print quality of the black portion is not as you expected, select the Enhance Black Printing check box in the printer driver.
-
Identify the colour causing the issue and put in a new toner cartridge.
To identify the colour of the toner cartridge and replace toner cartridge, follow the steps below:- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the colour causing the issue.
-
Replace the toner cartridge of the problem colour.
> Click here to see how to replace the toner cartridge.
-
Install a new drum unit.
> Click here to see how to replace the drum unit.
DCP-L3510CDW, DCP-L3550CDW, DCP-L8410CDW, MFC-L3710CW, MFC-L3730CDN, MFC-L3750CDW, MFC-L3770CDW, MFC-L8690CDW, MFC-L8900CDW, MFC-L9570CDW(T), MFC-L9577CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.