MFC-J985DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcj985dw_us_eu_as.jpg)
MFC-J985DW
Date: 15/10/2019 ID: faq00002192_010
My documents are sent to a different machine (the IP address is not unique and "IP Config" changes from "Auto" to "Static")
Set the BOOT method to "Auto" and disable the APIPA protocol:
-
Press
(Settings).
-
Press All Settings.
-
Press the Up or Down arrow to display Network, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display WLAN, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display TCP/IP, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display BOOT Method, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display Auto, and then press it. (This step might be skipped in some models.)
-
Press Auto.
-
Press the Up or Down arrow to display APIPA. Press APIPA.
-
Press Off.
-
Press
(Home).
If you still cannot use your machine, restart your wireless network interface.
DCP-9015CDW, DCP-9020CDW, DCP-J552DW, DCP-J562DW, DCP-J752DW, DCP-J785DW, MFC-9330CDW, MFC-9340CDW, MFC-J4510DW, MFC-J4710DW, MFC-J650DW, MFC-J6520DW, MFC-J6720DW, MFC-J680DW, MFC-J6920DW, MFC-J6925DW, MFC-J870DW, MFC-J880DW, MFC-J985DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.