DCP-8025D
FAQs & Troubleshooting |
DCP-8025D
Date: 16/01/2006 ID: faq00000334_000
My FAX/MFC/DCP does not print or prints garbage when printing the first document after starting the PC.
Please make sure that the printer port is set to BMFC and not to LPT1.
For Windows® 95/98/98SE/Me/NT/2000 users:
-
Click [Start], [Settings], [Printers].
-
Right click on the printer icon of your model name and select Properties.
-
Click on the Details or Ports tab depending on your OS.
-
Select BMFC port for "Print to the following port".
-
Click APPLY then OK to close the window.
For Windows® XP users:
-
Click [Start], [Printers and Faxes].
-
Right click on the printer icon of your model name and select Properties.
-
Click on the Port tab and check BMFC.
-
Click APPLY then OK to close the window.
Test print a document. Your FAX/MFC/DCP should now print correctly.
DCP-7010, DCP-7010L, DCP-7025, DCP-8020, DCP-8025D, MFC-580, MFC-590, MFC-7225N, MFC-7420, MFC-7820N, MFC-8220, MFC-8420, MFC-8820D, MFC-890, MFC-9030, MFC-9070, MFC-9160, MFC-9180, MFC-9420CN, MFC-9660, MFC-9760, MFC-9880
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.