FAQs & Troubleshooting

Close

DCP-9045CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-9045CDN

Not your product?

Date: 30/07/2007 ID: faq00000310_004

How do I clear the message "Jam Duplex" from the LCD?

To clear paper jams, please follow the steps below.


  1. Pull the paper tray completely out of the machine and check inside the machine.
  1. If paper is not caught inside the machine, check underneath the paper tray.

 

DO NOT put the paper tray back in at this point.

  1. If the paper is not caught in the paper tray, open the back cover.
  1. Push the grey lever on the left hand side (1) to the right.

After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover of the machine, DO NOT touch the shaded parts shown in the illustration.

  1. Pull out the jammed paper slowly.
  1. Reset the grey lever on the left hand side (1) back to the original position.
  1. Close the back cover.
  1. Put the paper tray firmly back in the machine.

Related Models

DCP-9042CDN, DCP-9045CDN, MFC-9450CDN, MFC-9840CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.