MFC-J1300DW
 |
FAQs & Troubleshooting |
MFC-J1300DW
Date: 22/03/2019 ID: faq00000299_516
Set the Date and Time
(MFC models)
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.
(DCP models)
If the machine's power has been off, the machine's date and time may not be current. Re-enter them.
- Press
[Settings]. - Press
[Date & Time]. - Press [Date].
- Enter the last two digits of the year on the touchscreen, and then press [OK].
- Enter two digits for the month on the touchscreen, and then press [OK].
- Enter two digits for the day on the touchscreen, and then press [OK].
- Press [Time].
- Enter the time (in 24-hour format) using the touchscreen.Press [OK].
(For example, enter 19:45 for 7:45 PM.)
- Press
.
DCP-J1100DW, MFC-J1300DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.