MFC-J5335DW
 |
FAQs & Troubleshooting |
MFC-J5335DW
Date: 09/05/2017 ID: faq00000299_503
Set the Date & Time
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.
MFC-J2330DW/MFC-J5330DW/MFC-J5335DW
- Press
[Settings]. - Press
[Date & Time]. - Press [Date].
- Enter the last two digits of the year on the Touchscreen, and then press [OK].
- Enter two digits for the month on the Touchscreen, and then press [OK].
- Enter two digits for the day on the Touchscreen, and then press [OK].
- Press [Time].
- Enter the time (in 24-hour format) using the Touchscreen.Press [OK].
(For example, enter 19:45 for 7:45 PM.)
- Press
.
MFC-J2730DW/MFC-J5730DW/MFC-J5930DW
- Press [Settings].
- Press[Date & Time].
- Press [Date].
- Enter the last two digits of the year on the Touchscreen, and then press [OK].
- Enter two digits for the month on the Touchscreen, and then press [OK].
- Enter two digits for the day on the Touchscreen, and then press [OK].
- Press [Time].
- Enter the time (in 24-hour format) using the Touchscreen.Press [OK].
(For example, enter 19:45 for 7:45 PM.)
- Press.
MFC-J5330DW, MFC-J5335DW, MFC-J5730DW, MFC-J5930DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.