FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

HL-1230

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 10/01/2006 ID: faq00000295_000

All the lights are blinking then the drum is blinking.


This indicates a Fuser Malfunction. 

  • Turn the printer Off, wait 10 minuites and then turn the printer On again.
  • If the alarm continues, perform a Factory Reset:
  1. Turn the printer off.
  2. Hold in the circular button on the front panel of the printer.
  3. Turn the printer back on.
  4. When the DRUM light is lit by itself release the button.
  5. Hold in the circular button on the front panel again.
  6. Once the Alarm light comes on, release the button.
  7. This has performed a factory reset on the printer.

If this does not clear the problem, contact Brother Customer Service.

Related FAQs

Related Models

HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.