DCP-8065DN
FAQs & Troubleshooting |
DCP-8065DN
Date: 13/10/2015 ID: faq00000292_012
What kind of memory can I use?
This machine has 32 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs). When you add the optional memory, it increases the performance for both copier and printer operations.
In general, the DIMM must have the following specifications:
- Type: 144 pin and 64 bit output
- CAS Latency: 2
- Clock Frequency: 100 MHz or more
- Capacity: 64, 128, 256 or 512 MB
- Height: 31.75 mm (1.25 inches)
- DRAM Type: SDRAM 2 Bank
This type of memory DIMM is available from most major memory suppliers.
The chart below lists two suppliers and their part numbers.
Buffalo Technology | 128 MB | VN133-D128 / VN133-X128 |
256 MB | VN133-D256 | |
512 MB | VN133-D512 | |
TechWorks | 64 MB | 12165-0004 |
128 MB | 12462-0001 | |
256 MB | 12485-0001 | |
512 MB | 12475-0001 |
- For more information, contact Brother Customer Service.
Related FAQs
DCP-8060, DCP-8065DN, MFC-8460N, MFC-8860DN, MFC-8870DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.