FAX-T96
 |
FAQs & Troubleshooting |
FAX-T96
Date: 10/01/2006 ID: faq00000261_012
How do I improve the copy or fax quality?
Please clean the print head and the scanner area inside the unit. Follow the steps listed below:
To clean the print head:
- Unplug the telephone line cord and then the power cord.
When you reconnect these lines later, connect the power cord first, then the telephone line cord. - Open the top cover by lifting the lever on the right side of the top cover.
- Take out the print cartridge.
-
To clean your fax machine's print head, wipe the print head with a lint-free cloth that is dry or lightly moistened with isopropyl alcohol.
-
Wait until the alcohol on the print head is completely dry.
-
Install the print cartridge.
-
Close the top cover. Press down on both sides of the top cover until it clicks.
To clean the scanner area:
-
Unplug the telephone line cord and then the power cord.
When you reconnect these lines later, connect the power cord first, then the telephone line cord. -
Open the top cover by lifting the lever on the right side of the top cover.
- Clean the white bar and the glass strip with isopropyl alcohol on a lint-free cloth.
Be careful not to bend the white film or drop anything into the fax machine.
- Close the top cover. Press down on both sides of the top cover until you hear it click into place.
FAX-T94, FAX-T96, FAX-T98
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.