MFC-J480DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcj480dw_us_eu_as.jpg)
MFC-J480DW
Date: 16/07/2019 ID: faq00000259_030
Improve poor print quality
Brother strongly recommends that customers use only genuine Brother ink for best results. Using non-Brother supplies may affect the hardware performance, print quality and machine reliability since the ink formulation in genuine Brother ink cartridges prevent smearing and clogging of the print head. The Brother limited warranty does not apply to any issue that was caused by the use of third party ink and/or cartridges.
> Click here for more information about Genuine Brother Supplies.
Cleaning the four colour print heads (black, cyan, magenta, and yellow) or adjusting the vertical alignment may improve the print quality.
-
If your printed pages have a horizontal line in the text or graphics (as shown in the illustration below) or blank text, some of the nozzles may be clogged and need to be cleaned. Go to Section 1 for instructions on how to print the Print Quality Check sheet and clean the clogged print head.
Changing the print quality setting in the printer driver to "Fine" may also improve the print quality.
-
If your printed pages have text that becomes blurred or images that become faded (as shown in the illustration below), you may need to adjust the print alignment. Go to Section 2 for instructions on how to print the Alignment Check sheet and adjust the print alignment.
Section 1: Checking the print quality and cleaning the print head
- Press Settings.
- Press the Up or Down arrow key to select Ink/Maintenance, and then press OK.
- Press the Up or Down arrow key to select Impr. PrintQuality, and then press OK.
- Press the Up or Down arrow key to select Impr. PrintQuality again, and then press OK.
- Press Color (Colour) Start. The machine will start printing the Print Quality Check sheet.
- Check the quality of the four colour blocks on the sheet.
-
The machine's display (LCD) asks about the print quality.
Do one of the following:- If all lines are clear and visible, select No to finish the Print Quality check, and then press OK. Go to STEP 14.
- If lines are missing as shown below, select Yes, and then press OK.
- The LCD asks you to check the print quality of each colour. Follow the instructions on the LCD and select the pattern 1, 2, 3 or 4 that most closely matches the printing result, and then press OK.
- If you select 2, 3 or 4, the LCD prompts you to start cleaning. Press OK.
- After the cleaning procedure is finished, a message asking you to check the Print Quality appears. Select Yes.
- Press Color (Colour) Start. The machine starts printing the Print Quality Check sheet again.
- When it has been printed out, check the quality of the four colour blocks on the sheet again.
-
The LCD will asks about the print quality.
Do one of the following based on the print quality of the check sheet:- If all lines are clear and visible, select No to finish the Print Quality check, and then press OK. Go to STEP 14.
- If the print quality continues to be poor, press Stop/Exit and contact Brother Customer Service from the "Contact Us".
Cleaning the print head consumes ink. If the print quality continues to be poor, contact Brother Customer Service from the "Contact Us".
- Press Stop/Exit.
Section 2: Checking the Print Alignment
- Press Settings.
- Press the Up or Down arrow key to select Ink/Maintenance, and then press OK.
- Press the Up or Down arrow key to select Impr. PrintQuality, and then press OK.
- Press the Up or Down arrow key to select Alignment, and then press OK.
- Press OK.
-
Press Black (Mono) Start or Color (Colour) Start.
The machine starts printing the Alignment Check Sheet.
-
For the (A) pattern, select the number of the test print that has the fewest visible vertical stripes (1-9), and then press OK
In the example above, row number 6 is the best choice. -
Repeat the previous step for the rest of the patterns.
When the print alignment has not been adjusted correctly, text looks blurry or crooked, as shown in the illustration below.
After the print alignment has been adjusted correctly, text looks as shown in the illustration below.
- Press Stop/Exit.
If the print quality continues to be poor, go to Section 1 to clean the print head.
Content Feedback
Please note this form is used for feedback only.