MFC-L8850CDW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl8850cdw_us_eu_as.jpg)
MFC-L8850CDW
Date: 14/05/2014 ID: faq00000216_025
Coloured spots at 94 mm (3.7 in.) intervals or at 30 mm (1.2 in.) intervals
Follow the steps applicable for your case to resolve the issue:
- Case 1: Coloured spots at 94 mm (3.7 in.) intervals
- Case 2: Coloured spots at 30 mm (1.2 in.) intervals
Case 1: Coloured spots at 94 mm (3.7 in.) intervals
- If the issue is not resolved after printing a few blank pages, foreign material, such as glue from a label, may be stuck on the drum surface. Clean the drum unit. Click here to see the details of how to clean the drum unit.
- Install a new drum unit. Click here to see the details of how to replace the drum unit.
Case 2: Coloured spots at 30 mm (1.2 in.) intervals
- Identify the colour causing the issue and put in a new toner cartridge.
-
To identify the colour of the toner cartridge and replace toner cartridge, follow the steps below:
- Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the colour causing the problem.
- Replace the toner cartridge of the colour. Click here to see the details of how to replace the toner cartridge.
DCP-L8400CDN, DCP-L8450CDW, HL-L8250CDN, HL-L8350CDW, HL-L9200CDWT, HL-L9300CDW(TT), MFC-L8650CDW, MFC-L8850CDW, MFC-L9550CDW(T)
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.