HL-L6250DN
 |
FAQs & Troubleshooting |
HL-L6250DN
Date: 26/02/2016 ID: faq00000151_041
Faint
Check the following points to resolve the issue:
-
If the machine indicates Replace Toner, install a new toner cartridge.
> Click here to see how to replace the toner cartridge. -
Check the machine's environment. Conditions such as humidity, high temperatures, and so on, may cause this print fault.
Refer to Product Safety Guide available in the Manuals section. -
If the whole page is too light, Toner Save Mode may be turned on. Turn off Toner Save Mode in the machine's menu settings or the printer driver.
> Click here to see how to turn the Toner Save Mode on or off. -
Clean the drum unit.
> Click here to see how to clean the drum unit. -
Clean the corona wire on the drum unit.
> Click here to see how to clean the corona wire. -
Replace the toner cartridge with a new toner cartridge.
> Click here to see how to replace the toner cartridge. -
Replace the drum unit with a new drum unit.
> Click here to see how to replace the drum unit.
DCP-L5500DN, DCP-L6600DW, HL-L5000D, HL-L5050DN, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW , MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.