HL-1670N
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl1670n_all.jpg)
HL-1670N
Date: 30/01/2014 ID: faq00000095_018
How do I install the Lower Tray Unit? (LT-500)
Follow the procedure bellow:
- Turn off the power switch, and then unplug the power cord.
- Close the Process cover, Multi-purpose tray, Face up output tray and Extension flap.
- Lift the printer carefully with both hands and place it on top of the Lower tray unit, so that the alignment pins on the Lower tray unit are inserted into the guide holes on the underside of the printer.
- Remove the paper cassette from the lower tray, and exchange with the cassette already fitted into the printer.
![](/g/b/img/faqend/faq00000095_018/gb/en/5038/4023lt1.gif)
-
Change the following settings in the printer driver Properties tab.
- Select the paper size.
- Select the Paper Source and Media type.
![](/g/b/img/faqend/faq00000095_018/gb/en/5039/11.gif)
HL-1650, HL-1670N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.