HL-4050CDN
FAQs & Troubleshooting |
HL-4050CDN
Date: 09/02/2016 ID: faq00000073_015
Print on both sides of the paper. (For Macintosh Users)
[Guidelines for printing on both sides of the paper]
- If the paper is thin, it may wrinkle.
- If paper is curled, straighten it and then put it back in the paper tray or the MP tray.
- If the paper is not feeding properly, it may be curled. Remove the paper and straighten it.
- When you use the manual 2-sided(duplex) function, it is possible that there may be paper jams or poor print quality.
Automatic 2-Sided(Duplex) printing
- Use A4, Letter, Legal, Folio or A4 Long size paper when you use the automatic 2-sided(duplex) printing function.
- Make sure that the back cover is closed.
- Make sure that the paper tray is completely inserted into the printer.
- If paper is curled, straighten it and then put it back in the paper tray.
- You should use plain paper, recycled paper or thin paper. Do not use bond paper.
For Mac OS X 10.3 or greater Users:
- Select Layout.
- Choose Long-edged binding or Short-edged binding in Two-Sided.
For Mac OS X 10.2 Users:
- Select Duplex.
- Check the Duplex check box.
- Choose Use Duplex Unit and then Choose Flip on Long Edge or Flip on Short Edge.
Manual 2-Sided(Duplex) Printing
- Use plain paper or recycled paper. Do not use bond paper.
For Mac OS X 10.3 or greater Users:
- Select Paper Handling.
-
Choose Odd numbered pages and print, and then choose Even numbered pages and print.
Related FAQs
HL-4050CDN, HL-4070CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.