DCP-1610W
FAQs & Troubleshooting |
DCP-1610W
Date: 15/10/2019 ID: faq00000027_030
Print the Network Configuration Report
This report lists all the current network configuration settings, including the network print server settings.
- Turn your Brother machine on.
- Wait for 60-90 seconds for the machine to connect to the network.
- Press Menu.
-
Do one of the following:
-
For MFC machines
Press the Up or Down arrow key to display the Print Reports option, and then press OK. -
For DCP machines
Press the Up or Down arrow key to display the Machine Info. option, and then press OK.
-
For MFC machines
- Press the Up or Down arrow key to choose the Network Config option, and then press OK.
- Press Start.
If the IP address does not get updated, make sure your Brother machine is correctly set up and connected to a wired or wireless network.
DCP-1610W, DCP-1612W, DCP-L2520DW, DCP-L2540DN, MFC-1910W, MFC-L2700DN, MFC-L2700DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.