WD-370B
 |
FAQ et Diagnostic |
WD-370B
Date: 18/11/2020 ID: faqp00100202_001
How do I clean my AiRScouter?
-
Cleaning the lens
If the lens becomes smudged or dirty, you may not be able to clearly see the image on the Head Display.
If this occurs, wipe away dirt and dust form the lens using a soft cloth.Never use ethanol, organic solvents or organic chemicals. Such substances could cause the lens coating to peel off the anti-reflection film, so that the image will not be seen normally.
-
Cleaning the Head Band
If the Head Band pads become dirty, they can be wiped clean with a dry cloth. If this is insufficient to clean the pads, they may be cleaned with ethanol, but take care to prevent any splashing onto the lens. -
Cleaning the Control Box
Dirt and dust can be removed from the Control Box by wiping it clean with a dry cloth.
If this is insufficient, you can use a moistened cloth, but make sure that it is well wrung to minimize the risk of getting water into the Control Box.
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.