FAQ et Diagnostic

Fermer

FS-40

FAQ et Diagnostic

FAQ et Diagnostic

Date: 12/12/2018 ID: faqh00000379_000

When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.

Please check the Bobbin Winder.

If the Bobbin Winder shaft is moved to the right position (bobbin winding mode), the needle will not move.

Please return the Bobbin Winder shaft to the left position and press the Start-Stop Button or Foot Control to start the machine in the sewing mode.

 

Modèles apparentés

AZ14, AZ17, BC-2100/2300, BC-2500, BM-3500/2600, CS10, CS120WT, CS70, CS-80, CS-8060, CS-8120, CX70PE, DS-120, DS-140, ES-2000, FS100WT, FS-20, FS-40, FS60, FS60s, FS70WT, FS70WTs, HF27, HF37, Innov-is 10/10A, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 20/20LE, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 50, Innov-is 500D, Innov-is 55, Innov-is 55FE, Innov-is 700E, Innov-is 750E, Innov-is 900, Innov-is 950, Innov-is 955, J14, J14s, J17, J17s, JS23, JX17FE, KD144, KD144s, KD40, KE14, KE14s, KE20, LS-1217, LS-1520, LS-1717, NX-200, NX-400Q/400, NX-600, PE-180D, PE-300S, PE-400D, PS-3100/3700, PS-53/55/57, PX-100/200/300, RH127, RH137, RL417, RL425, STAR 110/130E, STAR 230E/240E, X14, X14s, X17, X17s, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5050/5060/5070, XL-6040, XL-6053/6063, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: €Souhaitez-vous ajouter des commentaires?

Ce formulaire a pour seul but de nous faire part de vos commentaires.