RJ-3150
Usein kysytyt kysymykset ja vianmääritys |
RJ-3150
Päivämäärä: 15/10/2019 Numero: faqp00001665_007
How to identify the printer's firmware version
You can confirm the firmware version by printing the printer information.
To print the printer settings report:
- Make sure a roll of 3" (76.2 mm) receipt paper has been loaded and that the RD Roll compartment cover is closed.
- Turn on the printer.
- Press and hold the (Feed) button until the POWER indicator starts blinking in green (for RJ-3050/3050Ai) or the message “Printing” is displayed on the LCD display (for RJ-3150/3150Ai). The settings will print.
- When the list of printer settings is printed, check "ProgVer" under "<<PRINTER CONFIGURATION>>".
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.