Innov-is 750E
![]() |
Usein kysytyt kysymykset ja vianmääritys |
![](/g/b/img/product/hf_inov750eeuk.jpg)
Innov-is 750E
Päivämäärä: 04/06/2018 Numero: faqh00000184_000
"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD.
What does it mean and how do I clear it?
The machine is in embroidery mode and the combined character pattern is too large for the embroidery frame.
You can rotate the pattern 90 degrees and continue combining characters.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
-
For a correct operation
One beep is sounded. -
If an incorrect operation is performed
Two or four beeps are sounded. -
If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.