Innov-is 10/10A
Usein kysytyt kysymykset ja vianmääritys |
Innov-is 10/10A
Päivämäärä: 12/12/2018 Numero: faqh00000017_002
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
- If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
- Before start sewing, baste together the fabric and the hook-and-loop fastener.
Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.
Edge of the hook-and-loop fastener |
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.