MFC-L2700DW
Usein kysytyt kysymykset ja vianmääritys |
MFC-L2700DW
Päivämäärä: 15/02/2019 Numero: faq00100663_000
Print by Raspbian light (Linux)
Printing
Use the following command:
lpr -P BrGenPrintML2 print_file_name
To change the print settings, use the "-o" switch:
lpr -P BrGenPrintML2 -o PageSize=A5 -o Resolution=300dpi print_file_name
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W : brprintconf_mfcj430w
If the print jobs are not printed successfully, make sure you have correctly configured the printer's IP address or node name using the lpadmin command.
Supported File Formats
We recommend using the lpr command only when printing the following formats: PDF, PS, TXT, and JPG. To print other file formats, print directly from the application supporting that file format.
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.