MFC-5860CN
Usein kysytyt kysymykset ja vianmääritys |
MFC-5860CN
Päivämäärä: 27/11/2019 Numero: faq00100637_003
Print command (LPR) (Linux)
CUPS Users Only
The LPR command is not available in CUPS. To configure your machine, use your application's print dialog box or the CUPS web interface "http://localhost:631/printers".
Print Command :
lpr -P (printer name) (filename)
Configuration Command :
brprintconfij2 -P [Printer Name] [Option]
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W: brprintconf_mfcj430w
Option Table
Category | Option | Parameter Example |
Media | -md[parameter] | PLAIN |
Resolution | -reso[parameter] | Photo |
Bi-Dir Printing | -bidir [parameter] | ON |
MirrorPrint | -mirro [parameter] | ON |
Paper Type | -pt[parameter] | A4 |
Paper Thickness *1 | -thick[parameter] | THICK |
Paper Source *1 | -feed [parameter] | AUTO |
Color Or Mono | -corm[parameter] | COLOR |
Document | -doc [parameter] | PHOTO |
Color Matching *2 | -cm [parameter] | NATURAL |
Half Tone *2 | -ht [parameter] | DIFFUSION |
Color Enhance | -ce [parameter] | ON |
Brightness *3 | -brit [parameter] | [-20 - +20] |
Contrast *3 | -cont [parameter] | [-20 - +20] |
Red Key *3 |
-red [parameter] | [-20 - +20] |
Green Key *3 | -green [parameter] | [-20 - +20] |
Blue Key *3 | -blue [parameter] | [-20 - +20] |
Slow Dry | =-sd [parameter] | ON |
*1: Available only for applicable models.
*2: Available only when you select "CUSTOM" in the "Document" option.
*3: Available only when you select "ON" in the "Color Enhance" option.
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.