MFC-L5700DN
![]() |
Usein kysytyt kysymykset ja vianmääritys |
![](/g/b/img/product/mfcl5700dn_eu_as.jpg)
MFC-L5700DN
Päivämäärä: 09/06/2022 Numero: faq00100217_001
Access Web Based Management
The default login password to manage machine settings is either:We recommend you change it to protect your machine from unauthorized access.
-
the password located on the back or bottom of the machine preceded by "Pwd"
OR - initpass
- Start your web browser.
-
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2-
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://[your node name]
The NetBIOS name can be found in the Network Configuration Report. - For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
-
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
-
If the machine prompts you for a password, type it, and then click
.
If you have not previously set your own password, type the default login password above.
You can now change the print server settings.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the configuration.
Aiheeseen liittyvät kysymykset
DCP-J1100DW, DCP-L3517CDW, DCP-L3550CDW, DCP-L5500DN, DCP-L6600DW, HL-J6000DW, HL-J6100DW, HL-L3210CW, HL-L3230CDW, HL-L3270CDW, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), MFC-J1300DW, MFC-J5945DW, MFC-J6945DW, MFC-J6947DW, MFC-L3750CDW, MFC-L5700DN, MFC-L6800DW(T), MFC-L6900DW(T)
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.