MFC-7840W
 |
Usein kysytyt kysymykset ja vianmääritys |
MFC-7840W
Päivämäärä: 11/05/2020 Numero: faq00100029_017
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
-
Press Menu.
-
Press the Up or Down arrow key to select LAN. Press OK.
-
Press the Up or Down arrow key to select Wired or WLAN. Press OK.
-
Press the Up or Down arrow key to select Wired Enable or WLAN Enable. Press OK.
-
Press the Up or Down arrow key to select On or Off. Press OK.
- Press Stop/Exit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Aiheeseen liittyvät kysymykset
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I can print but cannot scan via network. (For Windows)
- I can print but cannot scan via network. (For Mac)
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
- I cannot print using my Brother machine on a wired network. (Windows/macOS)
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.