HL-5370DW
![]() |
Usein kysytyt kysymykset ja vianmääritys |
![](/g/b/img/product/hl5370dw_eu_as.jpg)
HL-5370DW
Päivämäärä: 27/11/2008 Numero: faq00002541_000
How do I clean the paper pick-up roller?
If the paper pick-up roller is stained, the printer may not feed paper. In that case, clean the paper pick-up roller
as follows:
- Turn off the power switch and unplug the printer.
- Unplug the power cord and interface cable from the printer.
- Pull the paper tray out of the printer.
- Dampen a soft cloth with lukewarm water and wipe the separator pad (1) in the paper tray with it.
- Wipe the two paper pick-up rollers (1) inside the printer.
- Put the paper tray back in the printer.
- Make sure that you have turned off the power switch, and then connect the power cord and interface
cable to the printer. - Plug in the power cord and turn on the power switch of the printer.
HL-5340D, HL-5350DN, HL-5370DW
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?
Vaihe 2: Haluaisitko antaa lisäkommentteja?
Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.